Sơn Epoxy Chống Tĩnh Điện KCC

Sơn Epoxy Chống Tĩnh Điện KCC

This Specification is applied ANTIDUST, ANTISTATIC epoxy floor coating declared on the drawing. As this product is a two-component, polyamide cured epoxy resin based paint with excellent resistance to water, chemical, abrasion and impact and antistatic effect, it is applied with KCC or another product above equality after submitting samples and gaining the approval of the inspector.

Recommended Use Sơn Epoxy Chống Tĩnh Điện KCC

Floor of clean room, pharmaceutical factory and surgical operation room.

Place handling flammable gas, chemicals, organic solvent.

Floor of electric, computer and semi conductor industries.

Place requested anti-dust and anti-static effect.

Xem thêm các loại Sản Phẩm “ Sơn KCC ” khác .

Application

      1 . Surface Preparation

(1) Concrete must be cured at least 30 days at 20℃/68℉ and below 85% R.H.

(2) Remove any oil and grease from surface to be coated. Surface must be grinded or abrasive blasted to remove laitance and other impurities.

(BLASTING, CHIPPING, DIAMOND WHEEL GRINDING or 10％ HCL cleaning)

(3) Optimum pH value is 7~9 (Moisture content of the concrete surface must be below 6%)

(4) Fill up a gap or groove with a UNIPOXY PUTTY, The portion where the crack is serious need to be repaired with a epoxy resin mortar and in the case of new construction joint after coating need to be cut and sealed with a PU9330(N).

(5) If wall is close to floor, do v-cutting the edge of the region.

(6) Pay attention to secure substrate smoothness because substrate smoothness is an important element of anti-static performance.

Sơn Epoxy Chống Tĩnh Điện KCC

CÔNG TY KCC Việt Nam, thuộc tập đoàn hóa chất KCC trụ sở chính hiện đặt tại Hàn Quốc. Ngoài trụ sở chính, KCC hiện có 13 nhà máy tại Hàn Quốc và 12 nhà máy và chi nhánh tại các quốc gia khác trên toàn thế giới như Singapore, Malaysia, Trung Quốc, Ấn Độ, Thổ Nhĩ Kỳ và Việt Nam.